Steps To Make A Vaporizer
Vaporizer has proved to be a boon for the smokers. It protects the lungs from getting damaged. It helps the users by giving them the same experience of excitement while smoking. Here are the points which describe the procedure of making a vaporizer.
The equipments required for making a vaporizer are: wood, drill machine and plastic bottle.
First step include the cutting of flat wood in to an equilateral triangle with a side of 8 inches.
Secondly stain the wood and then varnish it.
Now assume one flat side if the triangle to be the top and at the center of triangle mark both sides as top or bottom.
Now you have to select a drill bit size so that the soldering iron handle can be fitted in to the hole created by the drill with its rim on the top.
You should now drill through the center of the triangular piece with the chosen size bit.
Mark 3 spots about 1 inch from each vertex and drill each of these with the smallest bit size at an angle of 15 degree and turn the triangular piece to the top.
Cut the bottom of 2 liter plastic bottle and cut out the middle portion of this piece and now place black piece in the center of triangle over the cut hole. Now put two nails passing through it.
Hot glue should be used around bottom of black piece to fill the cracks.
A rod should be put in each of these holes and should be hit gently with a hammer to put them over right place. Lastly a soldering iron cord must be put through the hole.